page 1
page 2
page 3
page 4
page 5
page 6
page 7
page 8
page 9
page 10
page 11
page 12
page 13 page 14
page 15
page 16
page 17
page 18
page 19
page 20
page 21
page 22
page 23
page 24
page 25
page 26
page 27
page 28
page 29
page 30
page 31
page 32
page 33
page 34
page 35
page 36
page 37
page 38
page 39
page 40
page 41
page 42
page 43
page 44
< prev - next > Energy Stoves and Ovens mud_stoves (Printable PDF)
Enhancing Efficiency
Experience has shown that for a mud stove to be efficient:
The thickness of the walls should be at least as wide as the palm of your hand.
Figure 3.5 Measuring the wall thickness
Figure 3.6 The height of the pot rest
The pot rests should be as high as the width of your thumb.
The height of the fire chamber should not be more than the length of your palm. In Uganda,
some promoters use sufurias to determine the height of the fire chamber, which is usually
equal to about three-quarters the diameter of the most commonly used sufuria placed with the
bottom against the stove.
Figure 3.7 The height of the fire chamber
Figure 3.8 Height of fire chamber measured using a
sufuria
Pot holes should be adjacent to each other.
In cases where a stove has more than two pot holes, the connecting channels should be at
least as wide as the fist.
Figure 3.9 Positioning of the pot holes
Figure 3.10 The diameter of the connecting channel
The number of pot holes in one mud stove should not exceed two. Initially promoters
encouraged the use of three pot holes but later found that there were frequent chimney
blockages. The efficiency of the stove is reduced if it has more than two pot holes because
7